3M™ Cold Shrink Splice Kit QS2012T, Tape, Wire, Unishield, EP-Lead or XLP-Lead, CN, JCN and PILC, 15 kV, 3/0 AWG-350 kcmil PILC, 4/0 AWG-500 kcmil Poly/EPR, 1 per/case
- 3M ID 7100167446
Details
Highlights
- Oil stop tubes provide rejacketing and moisture-seal protection to the splice
- Resists water and eliminate the need of sweat lead
- Designed for PILC transition to the poly/EPR cable
- 0.74 to 1.17-in O.D. insulation
- Accommodates wire size of 3/0 AWG to 350 kcmil
- Rated for 15 kV applications
- Maintains resiliency and pressure even after years of aging and exposure
- Includes a cold shrink splice body, ground braids, Scotch® 13 semi-conducting tape, Scotch 23 rubber tape, Scotch 2228 rubber mastic tape and more
- IEEE Approved
- 1 kit/case
3M™ QS-2000T Series Cold Shrink Inline Transition Splice Kit is designed to splice PILC cable to poly/EPR cable. The kit provides resistance to fungus, ozone, acids and alkalis.
This kit allows you to splice either single-conductor PILC cable to single-conductor PILC cable, or single-conductor PILC cable to single-conductor Poly/EPR cable. Because of the design of the splice, size transitions can also be accommodated rather easily. Each kit makes one single conductor splice.
Typical Properties
