3M™ Cold Shrink QS4 Integrated Splice QS4-35SP-1/0-350-BCA
- 3M ID 7100165469
Details
Highlights
- Inline splice for joining JCN, flat strap neutral, tape shield and LC cables
- Special-electrode design reduces electrical stress at critical cable and splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
- 1.07 to 1.7-in O.D. insulation
- Accommodates wire size of 1/0 AWG to 350 kcmil
- Standard joint includes braid for easy connection to ground
- Rated for 35 kV cables
- Withstands a temperature range of 221 to 284 degrees F (105 to 140 degrees C)
- IEEE Approved
3M™ QS4-35SP Series Cold Shrink Integrated Splice Kit is a 35 kV-class inline splice designed to join JCN, flat strap neutral, tape shield and LC power cables. Cold shrink design fits type MV-90 or MV-105 cables with aluminum or copper conductors while ensuring easy installation. The silicone-rubber construction offers good high- and low-temperature performance.
Typical Properties
| Brands | 3M™ |
| Case Quantity | 1 |
| Conductor Material | Aluminum, Copper |
| Conductor Type | Aluminum or Copper |
| Connector Included | No |
| Dielectric Strength (V/mil) | 370 v/Mil |
| For Use With | Aluminum and/or Copper Conductors |
| For connection of paper - with plasticinsulated cables | No |
| Insulation Level | 1.33, 100%, 133% |
| Insulation Outer Diameter (metric) | 27.2 mm, 43.2 mm |
| Lug/Stem Connector Included in Kit | No |
| Material | Silicone |
| Maximum Conductor Size (Metric) | 185 mm² |
| Maximum Voltage | 35 Kilovolt |
| Minimum Conductor Size (Metric) | 60 mm² |
| Model | Cold Shrink |
| Number of Conductors | 1 |
| Product Type | Splice |
| Shielding Type | Tape Shield, Jacketed Concentric Neutral (JCN), Longitudinally Corrugated (LC) |
| Splice Type | Cold Shrink |
| Units per Case | 1.0 |
| Voltage | 35 kV |
