3M™ 15kV 1/C PILC Splicing Kit QS2011T, Tape, Wire, Unishield, 5 - 35 kV, Poly/EPR; Paper Insulated Lead Covered (PILC), 1 per case
- 3M ID 7100034389
Details
Highlights
- Oil stop tubes provide rejacketing and moisture-seal protection to the splice
- Resists water and eliminate the need of sweat lead
- Designed for PILC transition to the poly/EPR cable
- 0.56 to 0.88-in O.D. insulation
- Accommodates wire size of 4 to 3/0 AWG
- Rated for 15 kV applications
- Maintains resiliency and pressure even after years of aging and exposure
- Includes a cold shrink splice body, ground braids, Scotch® 13 semi-conducting tape, Scotch 23 rubber tape, Scotch 2228 rubber mastic tape and more
- IEEE Approved
- 1 kit/case
3M™ QS-2000T Series Cold Shrink Inline Transition Splice Kit is designed to splice PILC cable to poly/EPR cable. The kit provides resistance to fungus, ozone, acids and alkalis.
This kit allows you to splice either single-conductor PILC cable to single-conductor PILC cable, or single-conductor PILC cable to single-conductor Poly/EPR cable. Because of the design of the splice, size transitions can also be accommodated rather easily. Each kit makes one single conductor splice.
Typical Properties
