3M™ Motor Lead Pigtail Splice 5311, 1 kV, 1-Hole Lug Connection, 10-4 AWG (feeder), 12-4 AWG (motor lead), 1 per case
- 3M ID 7100017508
Details
Highlights
- Splices motor lead cables to incoming feeder cables
- Designed to use with copper compression, 1-hole lugs
- Cable has a 0.17 to 0.24-in insulation O.D. for 12 to 8 AWG and 0.30 to 0.36-in insulation O.D. for 8 to 4 AWG wires
- Accommodates a 12 to 4 AWG motor lead cable
- Slip-on splice cover is made of durable EPDM rubber
- For inline connections at 1000V or less
- Includes 3 adapter sleeves, an inline splice cover, a silicone grease tube and an instruction sheet
- CSA Certified and RoHS 2011/65/EU Compliant
3M™ 5300 Series Motor Lead Inline Splice Kit is perfect to use with copper compression, 1-hole lugs. It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000V or less. The kit makes 3 splices, and can be used on cables that can withstand a maximum temperature of 194 degrees F (90 degrees C).
3M™ 5300 Series Motor Lead Inline Splice Kit contains 3 adapter sleeves, an inline splice cover, a silicone grease tube and an instruction sheet. It is designed for use with copper compression, 1- or 2-hole lugs. Its slip-on splice cover has a durable EPDM rubber construction while the mastic strips in the kit seal moisture. After being crimped onto the cables, use this kit to insulate and seal the lugs that are bolted together in an inline configuration. CSA Certified and RoHS 2011/65/EU Compliant .
Typical Properties
Resources
