3M™ Rejacketing Sleeve RJS-4, 4 ft coil, 10 /Case
- 3M ID 7100000971
- UPC 00054007431046
Details
Highlights
- Offers good resistance to moisture, corrosion, ozone and UV rays
- Secures the phase legs of medium-voltage and 3/C shielded power cables
- Designed for use on tape shield, wire shield, armored and non-armored power cables
- Comes in dark gray color
This sleeve has a metallic shield diameter range of 1.02-1.28 in (25,9-32,4 mm) and a voltage range of 3.3-35.0 kV.
3M™ Rejacketing Sleeves RJS Series are designed so that 3M™ Cold Shrink QT-III & Q-TIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armored and non-armored configurations. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.
Typical Properties
| Brands | 3M™ |
| Breakout Boot | No |
| Dielectric Strength (V/mil) | 428 V/mil |
| Elongation | 910 Percent |
| Inner Diameter After Shrink (Metric) | 25.9 mm |
| Inner Diameter Before Shrink (Metric) | 32.5 mm |
| Insulation Rejacketing | Yes |
| Product Color | Dark Gray |
| Units per Case | 10.0 |
| Overall Length (Metric) | 1219 mm |
