3M™ Hot Melt Applicator PG II LT, with Cartridge Feed, 1 Each/Case

Choose from a wide variety of 3M™ Hot Melt Applicators to meet your assembly and production needs, with minimal operator training necessary:
3M™ Hot Melt Applicator LT
Dispenses low temperature hot melt adhesive at a fixed temperature of 265ºF / 129ºC. Applicator LT is designed for use with low melt 5/8" x 2" TC sticks and is capable of dispensing up to 2.6 pounds of adhesive per hour. The applicator comes with a 0.093" tip to meet a wide variety of application needs.

Lightweight design provides easy handling
Thumb controlled feeder holds adhesive stick securely and dispenses precisely
On-demand feed control minimizes waste and dripping


3M™ Hot Melt Applicator LT with Quadrack Converter and Palm Trigger
Dispenses low temperature hot melt adhesive at a fixed temperature of 265ºF / 129ºC. Applicator LT Quadrack is designed for use with low melt 5/8" x 8" Quadrack (Q) sticks and is capable of dispensing up to 2.6 pounds of adhesive per hour. Applicator includes palm trigger that helps reduce repetitive motion fatigue.

Lightweight design for easy handling
Quadrack converter provides smooth and even flow
Palm trigger improves ergonomic comfort


3M™ Hot Melt Applicator PG II LT with Magazine Feed
A low temperature, high volume applicator that operates at a fixed temperature of 265°F / 129°C. Applicator PG II LT is designed for use with low melt 1" x 3" PG sticks and is capable of dispensing up to 6 pounds of adhesive per hour. Applicator includes magazine feed, stand and 9921, 9946 brass tips.

Supports high-volume demands
Rear cartridge feed port provides easy loading and continuous flow of adhesive
Convenient stands hold applicator in proper standby or hands free position
Available with cartridge (9 sticks) or magazine (3 sticks) feed


3M™ Hot Melt Applicator TC
Dispenses hot melt adhesive at a fixed temperature of 385ºF / 196ºC. This lightweight (only 10 oz.) Applicator TC is designed for use with 5/8" x 2" TC sticks and is