3M™ Scotch-Weld™ Epoxy Adhesive 2216, Gray, Part B, 5 Gallon (Pail), 1 Can/Drum
- 3M ID 7000046360
Details
Highlights
- Very flexible bond is resistant to extreme shock, vibration and flexing, making it ideal for potting and applications in the transportation industries
- Maintains a strong bond under expansion, contraction, and limited movement while retaining good strength after environmental aging
- Excellent for cryogenic bonding applications or adhering substrates that will be exposed to extreme cold
- Medium viscosity help minimize running, dripping, or migration while also self-leveling
- Medium viscosity help minimize running, dripping, or migration while also self-leveling
- Versatile bonding agent will adhered a wide variety of similar and dissimilar substrates, including metals and masonry
- Can be heat cured to reduce curing times from 7 days to as a little as 30 minutes
3M™ Scotch-Weld Epoxy Adhesive 2216 is a flexible, two-part epoxy adhesive that cures at room temperature. It provides a high strength bond with both high shear and peel strength while remaining highly flexible, making it ideal for applications where vibration and thermal expansion and contraction are common. It also withstands very cold temperatures without becoming brittle.
Maintains a Strong Bond Under Expansion, Contraction, and Limited Movement
Our 3M™ Scotch-Weld Epoxy Adhesive 2216 is designed for applications where high performance and flexible bonds are required. Its flexibility makes it ideal for applications involving dissimilar surfaces and where differing coefficients of thermal expansion are a consideration. Once fully cured the epoxy maintains an extremely strong bond under expansion, contraction and limited movement while also maintaining a good retention of strength over time and after environmental aging. With a 2:3 mix ratio it is a low viscosity epoxy. It flows smoothly for accurate dispensing. Both the base and accelerator are coded in contrasting colors to ensure you know which half of the product you are using.
Recommended Applications
Cryogenic bonding applications where bonded agents might experience temperature extremes
Potting where expansion and thermal changes may occur, such as solar panels and appliance or construction applications
Military bonding applications, for example bonding parts on movable transports
General aerospace and transportation bonding where vibrations and movement are common
Bonding ceramic, most plastics and glass to metal
Attaching various substrates to masonry and stone
Excellent for Cryogenic Bonding Applications
We've designed the 3M™ Scotch-Weld Epoxy Adhesive 2216 to perform under extremely frigid temperatures. Because it can withstand temperatures up to -423°F (-252°C), it is ideal for cryogenic bonding applications. At room temperature it offers a 90 minute work life to allow for repositioning and adjustments. It will slowly cure over 7 days, but can be heat cured to reduce this to as little as 30 minutes (at 200°F/93°C.) It has a bonded shear strength that can withstand up to 3,200 psi at 72°F (24°C).
Note: Our 3M™ Scotch-Weld epoxy adhesive 2
Typical Properties
| Adhesive Type | Epoxy |
| Applications | Encapsulating, Sealing, Potting, Impact Resistance, Bonding |
| Brands | Scotch-Weld™ |
| Container Size (Metric) | 18.93 L |
| Design Challenges | Impact & Shock Absorption, Noise Vibration & Harshness Control NVH |
| Hardness | 50 - 65 Shore D |
| Industries | Construction, Consumer Goods, Electronics, General Industrial, Military and Government, Specialty Vehicle, Transportation, Metalworking, Signage, Woodworking |
| Open Time | 90 min @ 72 °F (22 °C) |
| Performance Level | Good |
| Physical Form | Flowable Liquid |
| Product Form | Kit |
| Set Time | 8 hr - 12 hr |
| Shear Strength at 72 Degrees F (22 Degrees C) | 3200 psi |
| Specific Gravity | 1.33 |
| Specifications Met | NASA STD 6001 |
| Storage Temperature (Celsius) | 22℃ |
| Surface Type | Unpainted, Very Rough |
| Units per Case | 1.0 |
| Volume (metric) | 19 L |
| Work Life | 90 min |
Resources
Safety Data Sheets
Document Number: MSDS_1031673_MY_EN
(PDF)
Similar products
| Container Size (Metric) | 18.93 L | |||
| Set Time | 8 hr - 12 hr |
3M™ Scotch-Weld™ Epoxy Adhesive 2216, Gray, Part B, 5 Gallon (Pail), 1 Can/Drum
3M™ Scotch-Weld™ Epoxy Adhesive 2216, Gray, Part B/A, 1.66 Gallon, 2 Kit/Case
3M™ Scotch-Weld™ Epoxy Adhesive 2216, Translucent, Part B/A, 2 Quart, 6 Kit/Case
3M™ Scotch-Weld™ Epoxy Adhesive 2216, Gray, Part A, 5 Gallon (Pail), 1 Can/Drum